TIDAL Audio Assoluta Monobloc

Technical specifications of TIDAL Audio Assoluta Monobloc

• Concept: Truly isolated, linear and voltage regulator reference mono power amplifier.
• 3 specially developed high-performance and low-noise magnetic field-compensated transformers with perfect temperature compensation, mechanically decoupled and double-shielded with very high cable cross-section, total transformer output 2,400 VA
• 3 pure silver waveguide EMI filters in a resonance-damped composite housing for a low-interference power supply for the main transformers
• Low-noise, voltage-regulated high-speed linear power supply for the output stage.
• 58 high-quality capacitors with extremely low impedance and a total capacitance of 330,000 µF
• Multilayer PCB with 105 µm copper layer per layer from TIDAL’s own production facility
• Extremely wide copper strip PCB design for speaker output, main ground and power supply
• 200 A high-current press-fit sockets for the power supply and loudspeaker outputs.
• Pure silver pole terminals in CWT (Cold-Welding-Technology) for lowest resistance and most reliable contact
• 16 fast and low-distortion bipolar audio transistors for the output stage
• Hand-selected transistors, meticulously measured and matched with an accuracy of less than 1%.
• DC-coupled input circuit, without coupling capacitors or relays in the signal path from input to output
• No relay in the signal path from the XLR input to the speaker output
• Capacitors with extremely low impedance connected directly to the transistors for the shortest possible connections.
• The APM (Amplifier Protection Management) system developed by TIDAL is located completely outside the signal path
• The TIDAL APM system is an isolated and completely self-sufficient system for managing and controlling the safety of the output stages: Output current in relation to output voltage, short circuit current, DC offset, undervoltage and overvoltage.
• Sequential switching on and off of the daisy chain remote control for 4 amplifiers
• Power at 8 / 4 / 2 ohms (rated power) 380 W / 750 W / > 1,200 W
• Power at 8 / 4 / 2 ohms (pulse) 700 W / 1,300 W / > 1,900 W
• 1x 2,000 VA linear power supply
• Power consumption: < 1 watt in standby mode, 250 watts in low volume mode, 2,400 watts in full power mode.
• Gain bandwidth: greater than the sources with the highest resolution
• Damping factor: Ideal damping factor for completely lifelike music reproduction, perfect and even across the entire frequency spectrum.
• Distortion: < 0.01% at 4 ohms and 25 watts
• Distortion: < 0.08% at – 1 dB under maximum power
• Dimensions (width x height x length): 44 cm x 32.5 cm x 60 cm
• Weight per piece (without packaging): 85 kg